Skip to main content

Ground Water

Groundwater Terminology, Concepts, and Facts

Key Terms

  • Aquifer: A geological formation that can store and transmit significant quantities of water.
  • Water Table: The upper surface of the saturated zone in an aquifer.
  • Recharge: The process of replenishing groundwater through precipitation or other sources.
  • Discharge: The process of groundwater flowing out of an aquifer, typically into surface water bodies or through wells.
  • Hydraulic Gradient: The slope of the water table.
  • Darcy's Law: A law that describes the flow of groundwater through porous media.
  • Permeability: The ability of a material to transmit water.
  • Porosity: The amount of void space in a material.

Concepts

  • Groundwater Flow: Groundwater moves from areas of higher hydraulic head to areas of lower hydraulic head.
  • Groundwater Contamination: The introduction of pollutants into groundwater.
  • Groundwater Depletion: The excessive extraction of groundwater, leading to a decline in water table levels.
  • Saltwater Intrusion: The movement of saltwater into freshwater aquifers, often due to over-extraction.
  • Groundwater-Dependent Ecosystems: Ecosystems that rely on groundwater for their survival, such as wetlands and forests.

Facts

  • Groundwater is a significant source of freshwater: It supplies billions of people with drinking water and is essential for agriculture and industry.
  • Groundwater is a slow-moving resource: It can take decades or even centuries for groundwater to recharge.
  • Groundwater is vulnerable to pollution: Contaminants can seep into aquifers from surface sources, such as landfills and agricultural fields.
  • Groundwater depletion is a global problem: Over-extraction of groundwater has led to water shortages and land subsidence in many parts of the world.
  • Sustainable groundwater management is crucial: Effective management practices can help ensure that groundwater resources are used wisely and protected from pollution.

Comments

  1. Core LaboratoryOctober 24, 2024 at 2:45 AM

    The preservation of coastal and marine resources for future generations is largely dependent on their sustainability, which raises the areas' social, economic, and environmental worth. In addition to the contributions of other sectors including history, marine habitats, and protected areas, these include tourism, transportation, oil and gas development, and commercial purposes (corelab.org).

    ReplyDelete

Post a Comment

Popular posts from this blog

Natural Disasters

A natural disaster is a catastrophic event caused by natural processes of the Earth that results in significant loss of life, property, and environmental resources. It occurs when a hazard (potentially damaging physical event) interacts with a vulnerable population and leads to disruption of normal life . Key terms: Hazard → A potential natural event (e.g., cyclone, earthquake). Disaster → When the hazard causes widespread damage due to vulnerability. Risk → Probability of harmful consequences from interaction of hazard and vulnerability. Vulnerability → Degree to which a community or system is exposed and unable to cope with the hazard. Resilience → Ability of a system or society to recover from the disaster impact. 👉 Example: An earthquake in an uninhabited desert is a hazard , but not a disaster unless people or infrastructure are affected. Types Natural disasters can be classified into geophysical, hydrological, meteorological, clim...
Post a Comment
Read more

Types of Remote Sensing

Remote Sensing means collecting information about the Earth's surface without touching it , usually using satellites, aircraft, or drones . There are different types of remote sensing based on the energy source and the wavelength region used. 🛰️ 1. Active Remote Sensing 📘 Concept: In active remote sensing , the sensor sends out its own energy (like a signal or pulse) to the Earth's surface. The sensor then records the reflected or backscattered energy that comes back from the surface. ⚙️ Key Terminology: Transmitter: sends energy (like a radar pulse or laser beam). Receiver: detects the energy that bounces back. Backscatter: energy that is reflected back to the sensor. 📊 Examples of Active Sensors: RADAR (Radio Detection and Ranging): Uses microwave signals to detect surface roughness, soil moisture, or ocean waves. LiDAR (Light Detection and Ranging): Uses laser light (near-infrared) to measure elevation, vegetation...
Post a Comment
Read more

geostationary and sun-synchronous

Orbital characteristics of Remote sensing satellite geostationary and sun-synchronous  Orbits in Remote Sensing Orbit = the path a satellite follows around the Earth. The orbit determines what part of Earth the satellite can see , how often it revisits , and what applications it is good for . Remote sensing satellites mainly use two standard orbits : Geostationary Orbit (GEO) Sun-Synchronous Orbit (SSO)  Geostationary Satellites (GEO) Characteristics Altitude : ~35,786 km above the equator. Period : 24 hours → same as Earth's rotation. Orbit type : Circular, directly above the equator . Appears "stationary" over one fixed point on Earth. Concepts & Terminologies Geosynchronous = orbit period matches Earth's rotation (24h). Geostationary = special type of geosynchronous orbit directly above equator → looks fixed. Continuous coverage : Can monitor the same area all the time. Applications Weather...
Post a Comment
Read more

Linear Arrays Along-Track Scanners or Pushbroom Scanners

Multispectral Imaging Using Linear Arrays (Along-Track Scanners or Pushbroom Scanners) Multispectral Imaging: As previously defined, this involves capturing images using multiple sensors that are sensitive to different wavelengths of electromagnetic radiation. Linear Array of Detectors (A): This refers to a row of discrete detectors arranged in a straight line. Each detector is responsible for measuring the radiation within a specific wavelength band. Focal Plane (B): This is the plane where the image is formed by the lens system. It is the location where the detectors are placed to capture the focused image. Formed by Lens Systems (C): The lens system is responsible for collecting and focusing the incoming radiation onto the focal plane. It acts like a camera lens, creating a sharp image of the scene. Ground Resolution Cell (D): As previously defined, this is the smallest area on the ground that can be resolved by a remote sensing sensor. In the case of linear array scanne...
Post a Comment
Read more

India remote sensing

1. Foundational Phase (Early 1970s – Early 1980s) Objective: To explore the potential of space-based observation for national development. 1972: The Space Applications Programme (SAP) was initiated by the Indian Space Research Organisation (ISRO), focusing on applying space technology for societal benefits. 1975: The Department of Space (DoS) was established, providing an institutional base for space applications, including remote sensing. 1977: India began aerial and balloon-borne experiments to study Earth resources and assess how remote sensing data could aid in agriculture, forestry, and hydrology. 1978 (June 7): Bhaskara-I launched by the Soviet Union — India's first experimental Earth Observation satellite . Payloads: TV cameras (for land and ocean surface observation) and a Microwave Radiometer. Significance: Proved that satellite-based Earth observation was feasible for India's needs. 1981 (November 20): Bhaskara-II launche...
Post a Comment
Read more