Skip to main content

Planing for Resilience or Mitigation. Tsunami

Resilience measures for tsunamis can be divided into three categories:

Preparedness measures: These measures involve taking steps to ensure that people are informed and equipped to respond to a tsunami. This includes developing early warning systems, educating people about the signs of an impending tsunami, and conducting regular drills to practice evacuation procedures.

Structural measures: These measures involve building structures that can withstand the force of a tsunami. This includes constructing buildings on higher ground, building seawalls or other barriers to prevent water from flooding inland, and designing buildings with reinforced concrete and other materials that can withstand the force of a tsunami.

Recovery measures: These measures involve planning and preparing for the recovery process after a tsunami has occurred. This includes developing plans for emergency response, providing assistance to those who have been affected by the tsunami, and developing strategies to rebuild infrastructure and communities in the aftermath of a disaster.

Overall, resilience measures for tsunamis require a comprehensive approach that includes preparedness, structural measures, and recovery measures. By taking these steps, communities can better withstand the impact of a tsunami and recover more quickly from the damage it causes.




Comments

Post a Comment

Popular posts from this blog

Energy Interaction with Atmosphere and Earth Surface

In Remote Sensing , satellites record electromagnetic radiation (EMR) that is reflected or emitted from the Earth. Before reaching the sensor, radiation interacts with: The Atmosphere The Earth's Surface These interactions control how satellite images look and how we interpret them. I. Interaction of EMR with the Atmosphere When solar radiation travels from the Sun to the Earth, four main processes occur: 1. Absorption Definition: Absorption occurs when atmospheric gases absorb radiation at specific wavelengths and convert it into heat. Main absorbing gases: Ozone (O₃) → absorbs Ultraviolet (UV) Carbon dioxide (CO₂) → absorbs Thermal Infrared Water vapour (H₂O) → absorbs Infrared Concept: Atmospheric Windows These are wavelength regions where absorption is very low, allowing radiation to pass through the atmosphere. Remote sensing depends on these windows. For example, satellites like Landsat 8 use visible, near-infrared, and thermal bands located in atmospheric windows. 2. Trans...
Post a Comment
Read more

Types of Remote Sensing

Remote Sensing means collecting information about the Earth's surface without touching it , usually using satellites, aircraft, or drones . There are different types of remote sensing based on the energy source and the wavelength region used. 🛰️ 1. Active Remote Sensing 📘 Concept: In active remote sensing , the sensor sends out its own energy (like a signal or pulse) to the Earth's surface. The sensor then records the reflected or backscattered energy that comes back from the surface. ⚙️ Key Terminology: Transmitter: sends energy (like a radar pulse or laser beam). Receiver: detects the energy that bounces back. Backscatter: energy that is reflected back to the sensor. 📊 Examples of Active Sensors: RADAR (Radio Detection and Ranging): Uses microwave signals to detect surface roughness, soil moisture, or ocean waves. LiDAR (Light Detection and Ranging): Uses laser light (near-infrared) to measure elevation, vegetation...
Post a Comment
Read more

Platforms in Remote Sensing

In remote sensing, a platform is the physical structure or vehicle that carries a sensor (camera, scanner, radar, etc.) to observe and collect information about the Earth's surface. Platforms are classified mainly by their altitude and mobility : Ground-Based Platforms Definition : Sensors mounted on the Earth's surface or very close to it. Examples : Tripods, towers, ground vehicles, handheld instruments. Applications : Calibration and validation of satellite data Detailed local studies (e.g., soil properties, vegetation health, air quality) Strength : High spatial detail but limited coverage. Airborne Platforms Definition : Sensors carried by aircraft, balloons, or drones (UAVs). Altitude : A few hundred meters to ~20 km. Examples : Airplanes with multispectral scanners UAVs with high-resolution cameras or LiDAR High-altitude balloons (stratospheric platforms) Applications : Local-to-regional mapping ...
Post a Comment
Read more

Government of Kerala Initiatives for Water Management

Kerala, with its abundant rainfall and network of rivers, faces a dual challenge of water scarcity and excess —seasonal droughts and monsoon floods. The state government has implemented various policies and programs to address these challenges through sustainable water conservation, management, and distribution practices . Below is a detailed breakdown of the major water management initiatives in Kerala. 1. Jal Jeevan Mission (JJM) – Kerala Implementation Objective: To provide functional household tap connections (FHTC) to all rural households by 2024. Focuses on source sustainability and community-led water resource management. Key Features: Water Quality Monitoring & Surveillance: Ensures supply of safe drinking water through real-time monitoring. Decentralized Approach: Implementation through gram panchayats and local self-governments (LSGs) . Recharge & Conservation Measures: Rainwater harvesting, groundwater recharge, and watershed development inte...
Post a Comment
Read more

Atmospheric Window

The atmospheric window in remote sensing refers to specific wavelength ranges within the electromagnetic spectrum that can pass through the Earth's atmosphere relatively unimpeded. These windows are crucial for remote sensing applications because they allow us to observe the Earth's surface and atmosphere without significant interference from the atmosphere's constituents. Key facts and concepts about atmospheric windows: Visible and Near-Infrared (VNIR) window: This window encompasses wavelengths from approximately 0. 4 to 1. 0 micrometers. It is ideal for observing vegetation, water bodies, and land cover types. Shortwave Infrared (SWIR) window: This window covers wavelengths from approximately 1. 0 to 3. 0 micrometers. It is particularly useful for detecting minerals, water content, and vegetation health. Mid-Infrared (MIR) window: This window spans wavelengths from approximately 3. 0 to 8. 0 micrometers. It is valuable for identifying various materials, incl...
Post a Comment
Read more